Home > Products > 2 Platen Injection Molding Machine > 1500 Ton Injection Molding Machine
1500 Ton Injection Molding Machine
  • 1500 Ton Injection Molding Machine1500 Ton Injection Molding Machine

1500 Ton Injection Molding Machine

The 1500 ton injection molding machine is a large-scale machine in the injection molding machine industry. The 1500 ton injection molding machine is also a special injection molding machine for environmental protection, medical, and household trash cans. It can be used to produce a 120L trash can.

Send Inquiry

Product Description

The 1500 ton injection molding machine is a large-scale machine in the injection molding machine industry. The 1500 ton injection molding machine is also a special injection molding machine for environmental protection, medical, and household trash cans. It can be used to produce a 120L trash can. Its parameter table is shown in the figure below:

Technical parameter

GF1500LB

Screw Diameter

mm

140

Screw L/D Ratio

L/D

20

Max. Shot Weight(PS)

g

8825

Injection Pressure

MPa

155

Screw Torque & Speed

rpm

0-100

Clamping Force

kN

15000

Opening Stroke

mm

3300

Space Between Tie Bars (H*V)

mm

1400X1250

Max. Mold Height

mm

1600

Min. Mold Height

mm

600

Ejector Stroke

mm

400

Ejector Force

kN

352

Hvdaulic System Pressure

MPa

17.5,25

Pump Motor Power

kW

160

Heater Power

kW

90

Oil Tank Capacity

L

1200

Machine Dimensions(approx.)(L*W*H)

M

12X3.4X3.0


The 1500-ton injection molding machine can not only produce plastic trash cans, but also produce plastic pallets, auto parts, and larger plastic chairs. One machine has multiple uses.


What are the advantages of a 1500 ton injection molding machine?


1.The two-plant structure on injection molding machine allows to reduce the working area.

2.Precise clamping force control can protect the mold effectively.

3.large opening stroke, which is suitable for trash can molding.

4.Servo control of mold to promise high-speed and stable running of the machines.

5.Equipped with demoulding linkage to shorten the molding cycle.

1500 Ton Injection Molding Machine

How to install a 1500 ton injection molding machine?


The working principle of the injection molding machine is similar to the syringe used for injection. It uses the thrust of the screw (or plunger) to inject the plasticized plastic in the molten state (that is, the viscous fluid state) into the closed mold cavity. The process of obtaining the product after curing and shaping. Injection molding is a cyclic process. Each cycle mainly includes: quantitative feeding-melting and plasticizing-pressure injection-mold filling and cooling-mold opening and part removal. After taking out the plastic part, the mold is closed again for the next cycle.

The plastic raw materials used in the injection molding process are diverse, and the types and forms of mold design are also diverse. In addition, the operators’ familiarity with the specific injection molding machine and the operating skills and practical experience of the workers are also different. At the same time, the objective environment (such as ambient temperature, humidity, air cleanliness) will also vary with the seasons.


Installation of 1500 ton injection molding machine equipment

If the machine is installed on a concrete foundation, a civil engineer should confirm the condition of the foundation before proceeding to the construction of the concrete foundation.

If the injection molding machine is installed on a flexible anti-vibration base, the foundation can be omitted, but the ground bearing capacity is required to be more than 10t/m2. At the same time, such anti-vibration pad keeps the whole machine in a stable and horizontal operation state.

The place where the machine is installed should be placed in a ventilated, dry, and dust-free place with enough operating space to ensure that it can be installed, debugged, and repaired around the equipment. At the same time, it should be ensured that the operator can easily patrol, pick up products, and transport Products. Sufficient space should be left where the equipment is installed.






Hot Tags: 1500 Ton Injection Molding Machine, Suppliers, Manufacturers, Factory, China, Made in China, Price, Price List, Quotation, Quality, Advanced, Easy-maintainable, 1 Year Warranty

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.