2 Platen Making Machine Servo System Car Bumper Injection Molding Machine

ZOWEITE® Injection molding machine is also known as injection machine or molding machine. It is the main making thermoplastic or thermosetting plastics into plastic products of various shapes with plastic molds. The injection molding machine applies high pressure to the molten plastic to make it shoot out and fill the mold. According to the different number of mold plates of the injection molding machine, the injection molding machine is divided into 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine and three plate injection molding machine. The 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine is simply an injection molding machine with two mold plates. In addition, the 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine is mainly hydraulic mold locking.

What is the difference between 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine and three plate injection molding machine?

● Difference in overall dimensions: The ZOWEITE® 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine is shorted than the three plate injection molding machine of the same model because it has no curved arm. It can save the workshop to a certain extent.

● Difference in working principle:The difference in working principle between the three plate injection molding machine and 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine is mainly reflected in the mold locking part. The unlocking mold of the three plate injection molding machine is realized by the reciprocating action of the curved arm driven by the high-pressure mold locking cylinder. During the mold locking of the 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine, the quick mold unlocking cylinder pulls the moving template to the set position, and the ram of the high-pressure mold locking cylinder and the quick mold unlocking cylinder pushes the moving template to realized the mold opening action.

● Compared with the three plate injection molding machine, the two injection molding machine has no curved arm, and the mold load is smaller. It is more energy-saving, simple maintenance and lower subsequent use cost than the three plate injection molding machine.

● Difference in mode adjustment. The tree plate injection molding machine needs mold adjustment, and the 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine does not need mold adjustment.

What are the advantage of the 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine?

1. Compact structure and strong rigidity.

The 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine has only two templates, with compact structure and high space utilization. The closing force lien of the 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine is short, only the distance between the fixed plate and the moving plate, and the rigidity of the formwork is large.

2. Large die opening stroke

The unlocking die stroke is not limited by the structure, and the unlocking die stroke can be increased according to the needs of the process. Meet the special requirements of complex molds with two or three parting surfaces and the needs of deep cavity products.

3. Precision control of clamping force

Fully hydraulic mode locking control, liner and controllable mode locking force, balanced force on four pull rods, fine adjustment and accurate control of mode locking pressure, and strong repeatability, which can significantly improve products quality.

4. Quick die change and convenient adjustment.

The 2 Platen Making Machine Servo System Car Bumper Injection Molding Machine can set the clamping force quickly in the computer interface.

5. Quick positioning and alignment of mold opening.

Using low pressure quick opening and closing die cylinder and external proportional pressure control to ensure low-pressure die protection, we can achieve fast, accurate and positioning and better protect the die.

6. High reliability and long service life.

The inorganic hinged is worn, and the mold ;locking force has good repeatability, high stability, and the pull road is stressed evenly to ensure that the service life of the injection molding machine and the mold will be provided. The mechanical hinges has strong mechanical wear under heavy load, resulting in the reduction of the inherent operation accuracy of the machine and high maintenance cost.

7. Strong process adaptability

2 Platen Making Machine Servo System Car Bumper Injection Molding Machine parameter