Pet Preform Making Injection Molding

ZOWEITE® Pet Preform Making Injection Molding is specially designed and manufactured according to PET material molding technology. Such as screw and barrel body design, cylinder heating precision controller, etc. ZOWEITE have 30 years experience in injection molding machine industry. We have launched special injection molding machine for PET preform: 260 ton, 320 ton, 400 ton, etc . The injection volume ranges from 684-3000g. It is suitable for PET preform of every size. With rich experience, we will provide Turn-key project for customers and recommend the suitable machine and solutions according the customer’s requirements.

What is the difference between special screw and ordinary screw of Pet Preform Making Injection Molding?

PET material is a common raw material for general plastic bottled drinks. It has low viscosity, good fluidity, large specific volume, easy to stick materials and high molding temperature, but the material temperature adjustment range is narrow and poor processability. During PET injection molding, acetaldehyde is easy to produce and lead to acidification if the material temperature is too high, the screw shear is too large or the rotating speed is too fast.

According to the characteristics of fast and uniform plasticization of pet and PET preform, the screw has good plasticization, high stability, non stick material, fast sol speed, and high success rate when blowing more bottle blanks.

What are the main injection molding conditions for PET? The barrel temperature of Pet Preform Making Injection Molding. The molding temperature range of PET is narrow, and the temperature will directly affect the properties of products. If the temperature is too low, the plasticization is not good, resulting in defects such as depression and shortage of plastic parts; On the contrary, if the temperature is too high, it will cause edge overflow, nozzle salivation, darker color, lower mechanical strength, and even degradation. Generally, the barrel temperature is controlled at 240-280℃, the barrel temperature of glass fiber reinforced pet is 250-290℃, which shall not exceed 300℃, and the nozzle temperature is generally 10-20℃ lower that barrel temperature. The mold temperature of Pet Preform Making Injection Molding: The mold temperature directly affects the cooling rate and crystallinity of the met. The properties of plastic parts. Generally, the mold temperature is controlled at 100-140℃. When forming thin walled plastic pars, a small value can be taken; When forming thick wall plastic parts, the large value can be taken The injection pressure of Pet Preform Making Injection Molding: PET melt has good fluidity and is easy to form. It usually adopts medium pressure, with the pressure of 80-140MPa, and the injection pressure of glass fiber reinforced pet is 90-150 MPa. The determination of injection pressure should consider the viscosity of PET, the type and quantity of filler, the position and size of gate, the shape and size of plastic parts, mold temperature, type of injection molding machine, etc.

ZOWEITE® Pet Preform Making Injection Molding adopts pet special screw to make the product more transparent, no pattern and higher yield. ZOWEITE has its own R & D team. In addition to pet special machines, there are also injection molding machines such as oil barrel special machines and lunch box special machines. We can recommend suitable machines according to customers' market and needs.