High Speed Plastic Cup Injection Molding Machine

Due to the outbreak of the new crown epidemic, the utilization rate of disposable plastic cups has gradually increased. In response to market demand, ZOWEITE® has launched a high-speed injection molding machine-High Speed Plastic Cup Injection Molding Machine. The High Speed Plastic Cup Injection Molding Machine has advanced energy-saving technology design, and the energy-saving effect is leading the injection molding industry.

High Speed Plastic Cup Injection Molding Machine advantage：
1.Highresponse oil electric SERVO system cooperates with linear slide rail to project a rigid suppoet structure.
2.Dedicated energy saving technology design, industry leading role of energy-saving effect.
3.Fast and stable injection quality, the machine can use lower cost raw materials or the same raw material to form thinner products, thus improve profitability.
4.Stable high rigidity mechanical structure design to ensure smooth high speed operation.
5.Machine synchronous structure and mold design greatly shorten the molding cycle.


Machine parameter:

Precautions for long-term downtime of High Speed Plastic Cup Injection Molding Machine:
1.ZOWEITE® High Speed Plastic Cup Injection Molding Machine and mold protection
Before the High Speed Plastic Cup Injection Molding Machine is stopped, the mold should be opened to a distance of 5-10mm, so that the clamping mechanism (crank arm) is in a semi-straight state, and the injection molding machine clamping mechanism (crank arm) is in an unforced stay. state, better protect the mold and clamping mechanism.
2. Barrel cleaning
Before shutting down, the plastic in the barrel should be cleaned up, and the original plastic remaining inside the barrel should be cleaned out with one of the plastics of PP, PS and PE. After cleaning, loosen the screw stroke to the maximum stroke. This can prevent part of the screw head from being burned out when the machine is heated up next time.
(1).If the plastic used is HB ordinary transparent plastic or natural color plastic, you can directly shoot the plastic inside the barrel without cleaning.
(2). If the plastics used are colored, VO fire-resistant plastics, corrosive plastics, and plastics with glass fiber, they must be cleaned with one of PP, PS, and PE. After the cleaning work is completed, the temperature of the material pipe can be directly turned off.
3.Drain the mold, barrel cooler, hydraulic oil cooler

First turn off the power supply of the cooling water tower, the water tower outlet pump, the chiller equipment and the mold temperature machine equipment, and then do the following four points of drainage protection.

(1). Close the water inlet and outlet valves of the hydraulic oil cooler of the injection molding machine, remove the inlet and outlet water pipe joints, and use the air gun of the air compressor to blow out all the residual water in the cooler (drain out) to avoid rusting or rusting inside the water ring. oxidation.
(2). Close the inlet and outlet water valves of the cooling water ring of the barrel (material pipe), remove the inlet and outlet water pipe joints, and use the air gun of the air compressor to blow out all the residual water in the cooling water ring (drain out) to avoid the water ring. Internal rust or oxidation.
(3). Close the water inlet and outlet valves of the mold (male mold/female mold), remove the water inlet and outlet pipe joints, and use the air gun of the air compressor to blow out all the residual water in the water transport system of the mold (drain out) to avoid the mold The mold core is rusted.
(4). Finally, turn off the power of the air compressor equipment and release the residual air pressure.

ZOWEITE®  is a China manufacturer.ZOWEITE has been in inejction molding machine for 30 years. We provide Turn-Key project, include plant design, whole production line and mols, machines installation and workers training. If you interested our machines, please do not hesitate to contact me, we give you the best price.