Low Loss Energy Saving Plastic Injection Molding Machine/Equipment
  • Air ProLow Loss Energy Saving Plastic Injection Molding Machine/Equipment

Low Loss Energy Saving Plastic Injection Molding Machine/Equipment

ZOWEITE® Plastic injection molding equipment made in China, also known as plastic injection molding machine, is a device that makes various types of plastic raw materials into desired products or preforms.

Send Inquiry

Product Description

We are commitment to offer the competitive price ,outstanding products quality, as well as fast delivery for Low Loss Energy Saving Plastic Injection Molding Machine/Equipment, We have ISO 9001 Certification and qualified this product or service .in excess of 16 years experiences in manufacturing and designing, so our goods featured with very best high-quality and aggressive rate. Welcome cooperation with us! Low Loss Energy Saving Plastic Injection Molding Machine/Equipment Preform Making Machine, Moulding Machine, Injection Molding Machine, We adopt advanced production equipment and technology, and perfect testing equipment and methods to ensure our product quality. With our high-level talents, scientific management, excellent teams, and attentive service, our products are favored by domestic and foreign customers. With your support, we will build a better tomorrow!

Low Loss Energy Saving Plastic Injection Molding Machine/Equipment, also known as plastic injection molding machine, is a device that makes various types of plastic raw materials into desired products or preforms.

Low Loss Energy Saving Plastic Injection Molding Machine/Equipment

What problems will occur in the adjustment part of Low Loss Energy Saving Plastic Injection Molding Machine/Equipment? How should the problem be handled?


1. Low Loss Energy Saving Plastic Injection Molding Machine/Equipment cannot be adjusted

①. The mechanical level and parallelism are out of tolerance. Check with a spirit level angle ruler. Adjust the parallelism and level. (against

Large models, small models have little effect)

②. The gap between the pressure plate and the die-adjusting nut is too small. Measure with feeler gauge. Adjust the gap between the pressure plate and the nut, adjust the mold nut

Clearance with pressure plate (clearance≤0.05mm).

③. Burning the nut: Check whether the nut can be turned to generate heat and iron powder is coming out. Replace the nut.

④. Adjust the upper and lower support plates. Remove the lock nut of the expense board to check. Adjust the adjusting nut.

⑤. The I/O board is broken. Check whether there is a signal at the output point on the computer page. Repair the electronic board.

⑥. The mold adjustment spool is stuck. Remove the valve and check. Clean the valve.

⑦. Die adjustment motor is broken: check the oil motor. Replace or repair the oil motor.


In addition, when the ZOWEITE® Low Loss Energy Saving Plastic Injection Molding Machine/Equipment is taking parts for injection molding, the safety door switch may not be closed smoothly, and the semi-automatic operation of the Low Loss Energy Saving Plastic Injection Molding Machine/Equipment may fail.

Low Loss Energy Saving Plastic Injection Molding Machine/Equipment

The principle of semi-automatic operation is: when the safety door is opened, the travel switch is closed, the machine sends a signal to start the semi-automatic action, and then the mold is closed. After the travel switch is touched, the mold is closed and the injection starts at the same time; the injection time relay starts timing and the injection time is up After that, the pre-molding starts, and when it touches the limit switch that has finished pre-molding, it starts to prevent flow. When it touches the anti-flow limit switch, the cooling time relay starts timing, and when the time is up, it will open the mold; After the mold terminates the stroke switch, perform the ejection action. After the ejection termination stroke switch is touched, the ejection action is performed. After the ejection termination stroke is encountered, the safety door is waited for opening.


In this way, work over and over again. It can be seen from the above that if the manual operation is normal, it is usually caused by the trip switch and time relay not sending a signal. According to the failure of the semi-automatic action in the mechanical cycle, compare the electrical appliances and hydraulic schematic diagrams to find out the corresponding control components, and check to solve them.

In short, more than 70% of the problems that occur in the production process of ZOWEITE® Low Loss Energy Saving Plastic Injection Molding Machine/Equipment are generally caused by the injection molding process and the adjustment and control of the plastic machine. As long as the technical level of the plastic injection equipment production operators continues to improve, the With a deeper understanding of performance, many problems can be solved.





Hot Tags: Preform Making Machine, Moulding Machine, Injection Molding Machine

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept