Servo Molding Machines

The Servo Molding Machinesis an injection molding machine with a servo system. It uses a servo motor. It is a more precise control machine. Servo Molding Machineshas 30 years of industry experience accumulation. These machines have passed ISO9001 certification and have quality assurance.

What are the characteristics of the Servo Molding Machines?

1. Faster response and higher accuracy. Compared with the traditional injection molding machine, the speed response of its pressure and flow is only about 0.03S, which not only can significantly improve the repeat accuracy, but also the position accuracy can reach within 0.1mm.

2. The molding cycle is shorter and the efficiency is higher. Thanks to the servo motor, the time required for the start and stop of each movement of the injection molding machine is shorter, and after the proportional valve is eliminated, the hydraulic leakage is reduced and the speed is faster.

3. The energy consumption of the motor is lower. Compared with the traditional asynchronous motor with an efficiency of about 80%, the efficiency of the servo motor of this equipment with the same power can reach more than 90%, which saves energy.

4. When the traditional motor starts, its current is 5 times that of normal operation, and the ZOWEITE® Servo Molding Machinesadopts the soft start mode, which will not cause an impact on the power grid.

5. Save water and fuel. The system has high efficiency, can effectively avoid the oil temperature rise, and the capacity of the water cooling is reduced, and the temperature rise range is reduced, thereby reducing the efficiency of hydraulic oil replacement. Through follow-up investigations of some pipe fitting manufacturers, it is found that the equipment only needs cooling water for 10-20 days in hot summer within a year, and the amount of cooling water used is only one-third of that of traditional injection molding machines.

6. Lower noise. The main source of noise of the Servo Molding Machinesis the power system. The power system composed of the servo motor and the gear pump has very low noise due to its working characteristics, so that the injection molding machine equipped with this system has very low noise.

What are the advantages of the Servo Molding Machines?

1. The operation speed is fast and precise, which greatly improves or improves the production environment and production efficiency.

2. The response speed can reach 0.03ms, which is far greater than the 0.3ms response speed of the variable pump, thus significantly improving the control accuracy.

3. The servo motor used by the Servo Molding Machines realizes opening and closing of the mold, ejection and demolding, and raw material injection and storage.