Plastic bottle cap injection molding machine

ZOWEITE® Plastic bottle cap injection molding machine can produce mineral water bottle caps, automatic flip bottle caps, 5 gallon bottle caps, children’s anti-theft capsule caps, etc. ZOWEITE machinery manufacture according to different sizes of bottle caps and customer requirements, we have developed 120 tons to 320 tons machine. We will provide the suitable machine , best price and completer bottle cap injection molding production line for customers according to their requirements.

What should be paid attention to during plastic bottle cap injection molding machine?

1.Inspection of oil temperature, pump shell temperature and electromagnet temperature: the oil temperature is normal when it is 20 ℃ ~ 50 ℃, and the pump shell temperature of plastic bottle cap injection molding machine is 10 ℃ ~ 30 ℃ higher than room temperature.

2.Adjust and check whether the regulating pressure of the counter flow valve can rise and fall continuously and evenly, and then adjust to the set pressure after everything is normal;

3.When the ZOWEITE® plastic bottle cap injection molding machine is started, the reverse flow valve shall be confirmed to be adjusted to the minimum pressure, that is, loosen the pressure regulating handle, and then jog the oil pump to observe whether there are abnormal conditions: such as whether the pump emits oil, whether there is abnormal sound, whether the pressure gauge fluctuates severely, etc;

4.Noise and vibration inspection: check whether the injection molding oil pump and electromagnet have abnormal noise, whether the pipeline has vibration sound, whether the oil cylinder has impact sound during reversing, and whether the pipeline is loose, etc.

5.Inspection of oil leakage: inspection of oil leakage at the joint surface of injection molding machine pump, output shaft, pipe joint, the joint between oil cylinder piston rod and end cover, all sides of mailbox, installation surface of various valve components, installation thread and installation flange.

Plastic cap injection molding machine parameter:

We have 30 years experience in injection molding machine industry. Our factory is a high tech enterprise specializing in R&D, production and sales of injection molding machines. We not only solve injection molding problems for customers, but also provide customers with professional injection molding solutions according to customers' market and requirements, so as to help customers gain advantages in market competition.

ZOWEITE Factory: