Home > Products > Bucket Injection Molding Machine > Plastic Paint Bucket Making Machine
Plastic Paint Bucket Making Machine
  • Plastic Paint Bucket Making MachinePlastic Paint Bucket Making Machine
  • Plastic Paint Bucket Making MachinePlastic Paint Bucket Making Machine

Plastic Paint Bucket Making Machine

ZOWEITE is manufacturer and supplier for providing customers with bucket injection turnkey engineering. If you are planning to invest in new projects of paint bucket injection molding machine and injection mold. Then please contact us.Welcome to buy Plastic Paint bucket making machine from us.

Send Inquiry

Product Description

ZOWEITE is manufacturer and supplier for providing customers with bucket injection turnkey engineering. If you are planning to invest in new projects of Plastic Paint bucket making machine and injection mold. Then please contact us.



Plastic Paint bucket making machine parameter

技术参数/Technical parameter
GF650CEH
注射装置Injection device
螺杆直径
Screw Diameter
mm
90
螺杆长径比
Screw L/D Ratio
L/D
21.1
注射重量(PS)
Max. Shot Weight(PS)
g
2952
注射压力
Injection Pressure
MPa
177
螺杆转速
Screw Torque & Speed
rpm
0-180
合模装置Clamping device
合 模 力
Clamping Force
kN
6500
移模行程
Opening Stroke
mm
900
拉杆内距
Space Between Tie Bars(H*V)
mm
920X868
最大模厚
Max. Mold Height
mm
950
最小模厚
Min. Mold Height
mm
400
顶出行程
Ejector Stroke
mm
250
顶 出 力
Ejector Force
kN
152
其他Others 最大系统压力
Hydaulic System Pressure
MPa
16
电机功率
Pump Motor Power
kW
82
电热功率
Heater Power
kW
33
油箱容积
Oil Tank Capacity
L
700
外形尺寸
Machine Dimensions(approx.)(L*W*H)
m
9.1*2*2.8

ZOWEITE Plastic Paint bucket making machine Turn-key project


plastic paint bucket making machine


1.For 5L, 10L, 20L and other paint buckets, we recommend GF650CEH GF780CEH machine. If your paint bucket needs IML to be pasted in the film, when using the injection mold of IML paint bucket, cooperate with ZOWIETE servo injection molding machine, IML robot labeling system and manipulator to take parts. You will get the fastest and most stable automatic paint bucket production line.

2.ZOWEITE is a high-performance servo dynamic control machine. The double cylinder injection design structure makes the injection molding more stable and the service life longer when the screw seat enters and exits. Highly optimized mechanical structure high-performance controller effectively improve the service life and injection precision of injection molding machine.

3.ZOWEITE Plastic Paint bucket making machine auxiliary equipment machines include: automatic feeding machine, hopper dryer, chiller, air compressor, material crusher, material mixing and color mixing machine, IML robot labeling system.

4.ZOWEITE Plastic Paint bucket making machine - turnkey engineering service will provide you with 24-hour cruise to ensure the efficient production of paint bucket / paint bucket products and minimize the energy consumption per unit of paint bucket / paint bucket products.


plastic paint bucket making machine


ZOWEITE Plastic Paint bucket making machine characteristic:

1. Strengthen the clamping system;

2. high- quality special plasticizing screw and high effciency of mixing colors;

3.fast and stable inejction quality, customers can use lower cost raw materials or same raw material to form thinner products, and improve profitability;

4. synchronous demoulding control, shortening the molding cycle.

Plastic Paint bucket making machine operation attention:

1. Before power transmission, make sure to turn off the power switch of motor and electric heating;

2. Check whether the circulating cooling water is unblocked. When the ZOWEITE injection molding machine is started and heated, it must ensure that the water switches of the hydraulic oil and the circulating cooling water of the barrel have been opened and unblocked;

3. If the machine is equipped with a centralized lubrication device, check the amount of oil in the device before starting the machine. Before the oil level falls and the warning line is opened, refill the lubricating oil and inject the oil to the specified oil level.

4. Check the parameters of the machine during operation. First put the machine in manual state, press the relevant button and look at the pressure gauge to predict the pressure of each section. When the electric heating is not heated to the set value (the temperature during normal operation), remember not to start the oil pressure motor, operate feeding, injection, ejection and other actions, otherwise the machine may be faulty or damaged;

5. Before checking and adjusting the functional parameters of the injection molding machine, try to turn off the power supply of the motor and oil pump. If it cannot be avoided, special care shall be taken. It is strictly prohibited to operate each key on the control board on the machine with one hand while the other hand does any work within the lock mold area or contacts any moving parts on the machine. It is absolutely prohibited to operate one machine by two people;

6. Operate ZOWEITE Plastic Paint bucket making machine: when the safety door is opened, it must be confirmed that the stop can fall automatically at the mold opening stop position, and do not move the bumper. Stop or bumper cover, when the machine stops at the mold opening and does not reach the termination position, the mechanical safety device does not work. Understand its key.


plastic paint bucket making machine


If you have a plan for the project of plastic paint bucket production line, or you want to invest in setting up a new factory to produce bucket products. Welcome to contact me for more information.




Hot Tags: Plastic Paint bucket making machine, Suppliers, Manufacturers, Factory, China, Made in China, Price, Price List, Quotation, Quality, Advanced, Easy-maintainable, 1 Year Warranty

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.