320 tons injection molding machine

ZOWEITE® 320 tons injection molding machine is a standard machine. It can produce this kind of different plastic products, such as plastic fittings, PET preform, nylon ties, lampshades and other plastic products. In addition to standard machines, we also have high speed machines and special machines. ZOWEITE manufactures will recommend the suitable and high quality machines according customer’s needs, and provide professional injection molding solutions according to customer’s needs, and provide professional injection molding solutions according to customer’s specific needs, so as to help customers gain advantages in market competition.

What is the molding process of the 320 tons injection molding machine?

Injection molding process has good adaptability to the processing of various plastics, high production capacity and easy to realize automation. The working principle of the 320 tons injection molding machine is similar to that of the syringe. It is the process of injecting the plasticized molten plastic into the closed mold cavity with the help of the thrust of the screw, and obtaining the product after curing and shaping. Injection molding is a cycle process, each cycle mainly includes: quantitative feeding - melting and plasticization - pressure injection - mold filling and cooling - mold opening and taking parts. After taking out the plastic part, close the mold again for the next cycle.

What are the evaluation aspects of plastic products?

1. Appearance quality, including integrity, color, luster, etc;

2. Accuracy between size and relative position;

3. Physical, chemical and electrical properties corresponding to the application.

These quality requirements are different according to the different application occasions of products, and the required scales are also different. The defects of products mainly lie in the design of molds, manufacturing accuracy and wear degree. But in fact, the technicians of plastic processing plants often suffer from the difficult situation of little effect in the face of technological means to make up for the problems caused by mold defects.

The adjustment of injection molding process is a necessary way to improve product quality and output. Because the injection cycle of ZOWEITE® 320 tons injection molding machine is very short, if the process conditions are not well mastered, there will be an endless stream of waste products. When adjusting the process, it is best to change only one condition at a time and observe more times. If the pressure, temperature and time are all adjusted together, it is easy to cause confusion and misunderstanding. In addition to the problem, I don't know why. There are many measures to adjust the process. For example, there are more than ten possible solutions to the problem of dissatisfaction with product injection. Only by selecting one or two main solutions to solve the crux of the problem can we really solve the problem.

320 tons injection molding machine parameter

ZOWEITE injection molding machine is a company specializing in the R & D and production of injection molding machines. As a high-tech enterprise integrating sales and service, it has accumulated 30 years of industry experience, and the injection molding machine has passed the certification of ISO / SGS. We pay attention to the specific needs of customers in different market segments, launch professional industry-specific injection molding solutions, meet the requirements of high efficiency, precision, energy conservation and environmental protection, and provide customers with turnkey projects.

ZOWEITE Machinery Factory