Automatic Plastic Injection Manufacturers

ZOWEITE® Plastic Injection Moulding Machine from China is to use the thermophysical properties of plastic to add material from the hopper to the barrel, metal the materials through the heating ring and screw of the barrel, and transport and compact them forward along the screw groove. The materials are gradually plasticized, melted and homogenized under the dual action of heating ring heating and screw shear. During the completion of plasticization, the rear screw injects the molten materila in the storage chamber into the mold cavity through the nozzle under the action of the piston thrust of the injection cylinder at high speed and high pressure.

ZOWEITE® Nucleic acid detection reagent tube injection molding machine is a machine for producing nucleic acid detection reagent tubes. Generally, it uses an ordinary machine of 200ton or larger, which depends on the output of customers and is determined according to the size and output of customers.ZOWEITE factory is a manufacturer of nucleic acid detection reagent tube machines, which can provide high-quality machines.

ZOWEITE® Injection molding machine is a kind of main molding equipment that uses thermoplatic or thermosetting materials to make plastic products of various shapes with plastic molding molds. The injection molding machine is usually composed of injection system, clamping system, hydraulic transmission system, electrical control system, lubrication system, heating and cooling system, safety monitoring system, etc. ZOWEITE 650 ton injection molding machine is a special injection molding machine for plastic bucket, which is suitable for injection molding machine of barrel products for lubricating oil bucket, paint bucket, chemical fertilizer bucket, and other purposes. ZOWEITE 650 ton injection molding machine also has standard machines. We can recommend the suitable machines according customers’ requirements.

ZOWEITE® PET preform making machine made in China is used to produce various plastic preforms. At present, PET is widely used in the container packaging of beverages, purified water, candy, biscuits, edible oil, cosmetics, pharmaceuticals and cleaning products. With the popularity of bottled drinks, the two-step forming process is used in the forming of large-volume tube blanks. The advantages are full.

The ZOWEITE® 2300ton injection molding machine is a relatively large injection molding machine in the injection molding machine industry. It can be specifically used to produce 120L and 240L trash cans,pallets,car bumpers,large chairs and other plastic products,the manufacturer will limit the size of the customer’s mold through a reasonable arrangement of code mold holes.

The chemical name of PET is polyethylene terephthalate, also known as polyester. At present, GF-PET is the most used by customers, mainly for preforms, so the sales of ZOWEITE® PET preform injection molding machines from China have soared. The rheology of PET in the molten state is better, and the pressure has a greater influence on the viscosity than the temperature. Therefore, the pressure is mainly used to change the fluidity of the melt.